News Archive

ExpertRC 1.3.0 RC and ExpertRS 0.6.4

https://eesdr.com/en/expertsdr2-en/software-en

https://eesdr.com/images/Document/ExpertRC%201.3.0;%20ExpertRS%200.6.4%20Release%20Notes.pdf

 

Main Features release schedule*:

January 2018

  • Design update, similar to what has been done to ExpertRC
  • VAC (voice data transfer) implemented in TCI, for digital modes operation

February 2019

  • New Antenna Switch
  • New ExctCtrl/PA tab
  • Transverter mode

March/April 2019

  • ALC
  • New IQ Player module
  • New RX module (similar to PROC module for TX)
  • Manual TNF

Summer 2019

  • Full Duplex
  • Predistortion

*Release schedule may be changed in time

Expert Electronics MB1 – Software and Firmware update

https://qrznow.com/expert-electronics-mb1-software-and-firmware-update/?utm_source=feedburner&utm_medium=email&utm_campaign=Feed%3A+QrzNow-HamRadioNews+%28Update%C2%B4s%21+QRZ+Now%29

New Adapters & Connectors !!!

New Adapers & Connectors !!!

ExpertRC 1.3 alpha 1 for remote control – Expert Electronics

http://qrznow.com/expertrc-1-3-alpha-1-for-remote-control-expert-electronics/

HRI-200 NEW FEATURE "Portable Digital Node Function"

HRI-200 NEW FEATURE "Portable Digital Node Function"

Please be announced that YAESU offers the new additional feature of the WIRES-X - “Portable Digital Node Function.” The “HRI mode” will be added to the following YAESU C4FM digital transceivers: FTM-400XD, FTM-100D and FT2D. Users can easily establish the portable node station at any locations by connecting one of these transceivers with PC – without setting up an Ethernet port with the conventional HRI-200.
With this new additional function, the WIRES-X access is possible even from Hotel room, Airport, Vehicle, a Free WiFi Space and so on.
This new feature will be certain to expand the flexibility and mobility of the WIRES-X communication with the conventional fixed type node station with the HRI-200 as well as for travelling.
This feature is available only by updating the C4FM digital transceivers’ firmware (FTM-400XD, FTM-100D, and FT2D), and the latest software including this function will be available in July 2018.

(New Available in July)

FTDX-101D 100W HF/50MHz All Mode SDR High-Class Transceiver

FTDX-101D 100W HF/50MHz All Mode SDR High-Class Transceiver

 

The new Yaesu FTDX-101D will be endowed with the latest SDR Technology and classified as YAESU High-End HF line, the FTDX series, which amateurs have come to know as synonym of superior quality.


- Very High-Class HF/50MHz 100W Transceiver
- SDR Technology and waterfall display
- Large high performance precision colour touch display
- Active Band Monitor enables rapid band changes with LED illumination of operating band
- Indipendent control of the Main and Sub Bands allows effortless operation for contesters needing to move quickly between the amateur bands
- High-Q VC Tuning Front-End
- Main tuning dial for Main and Sub Band frequency control includes an Outer Dial for clarifier, VC Tuning, fine tuning or custom settings

As you may recall, the name “101” comes from the legendary-popular best seller FT-101 series. With all its strength, YAESU produced this new HF transceiver to carry on the tradition of high quality known from the original 101 series. The new FTDX-101D will be certain to satisfy the variety of many amateur radio enthusiasts’ demands and contribute to your business into the future. Once we are ready to accept your orders, we will make an official announcement.

(New !!!)

ExpertSDR2 1.2 Released - Big Update!

ExpertSDR2 1.2 Released - Big Update!

FT-4XE / FT-4VE 5W FM Ultimate Compact Handheld Transceiver

FT-4XE / FT-4VE 5W FM Ultimate Compact Handheld Transceiver

FT-4XE (Dual band VHF/UHF)

FT-4VE (Single Band VHF)


- Size 52 x 90 x 30 mm (WxHxD)
- Weight 250 g with antenna and battery
- 1 W Audio Power
- 0.5/2.5/5 W HF Transmit power
- Charging time only 3.5 hours with supplied rapid charger SBH-22
- Two freely configurable buttons on the radio
- 200 Memories
- Scan possibilities: VFO, memory, band edge, memory bank, dual receive
- Adjustable step width: 5/10/12.5/15/20/25/50/100 kHz
- Split memory (Rx/Tx Frequency idependantly settable)
- VOX operation with option SSM-512B
- WFM receiver
- DTMF Operation

(New !!! - May)

FTM-7250DE C4FM/FM 50W 144/430MHz Digital AMS Transceiver

FTM-7250DE C4FM/FM 50W 144/430MHz Digital AMS Transceiver

- System Fusion-II Compatible
- Operates Advanced C4FM Digital and Conventional FM modes
- AMS (Automatic Mode Select) function automatically recognizes the signal as C4FM digital or conventional FM
- Sophisticated Digital-Group-ID (DG-ID) Operation
- Digital-Group-ID (DG-ID) Memory Feature : Up to 10 DG-ID pairs with alpha-numeric tags
- True 50 Watts (VHF and UHF) Stable High-Power Transmitter with Funnel Air-Convection Conductor (FACC) (Wind Tunnel)
- High Stability ±2.5 ppm TCXO Included
- 3W Powerful & Clear Audio with Front Speaker
- AMS with Multi-colored large LED Mode-Indicator Effortless FM and C4FM Operation - 225 Memory Channels with Alpha-numeric tags (maximum 8 characters)
- Wideband Receive for 108MHz - 579.995MHz (108 - 137MHz: Airband)
- Easily connect with the WIRES-X linking system
- Keyboard entry of operating frequencies from the microphone
- CTCSS and DCS Encode/Decode, with split Tone
- Versatile Scan features : VFO scan, Preferential Memory scan, Programmable memory scan and Dual watch

(New !!! - April)

FT-818ND 6W HF/VHF/UHF All Mode Portable Transceiver

FT-818ND 6W HF/VHF/UHF All Mode Portable Transceiver

The Yaesu FT-818ND continues the tradition of the popular FT-817ND and FT-817, it includes all the great features of the FT-817ND and adds these enhancement:


- Power increased to 6 watts
- TCXO-9 high-stability oscillator built-in
- SBR-32MH 9.6 Volt / 1900 mAh NiMH high capacity battery

(New !!! - April)