FREE shipment for orders over 1000.- CHF (Switzerland only)
 

5 Jahre offizielle YAESU-Garantie auf alle von uns verkauften Amateurfunkprodukte und 3 Jahre offizielle YAESU-Garantie auf alle CE-gekennzeichneten Amateurfunkgeräte, die von anderen Händlern gekauft wurden

 
 Seit 10 Jahren garantiert unser offizieller Partner für YAESU-Produkte unseren Kunden einen professionellen Reparaturservice und technischen Support, der in Europa einzigartig ist. 

 

Sonderangebot !!!

YAESU FT-710-AESS  999.- CHF

YAESU FT-710-FIELD  925.- CHF

 
 
  • 100€ CASHBACK bis 31.5.2025
  • 5 Jahre offizielle Yaesu-Garantie
  • Vorauszahlung
  • Angebot gültig solange der Vorrat reicht
 

"Early Spring 2025" CASHBACK PROGRAM

ModelCashback Ammount
  
FT-710-AESS100 €
FT-710-Field100 €
DR-2XE350 €
FT-5DE50 €

Gültig ab 1. März 2025 bis 31. Mai 2025

CASHBACK PROGRAM

HAMMER PREISE 2025 !!!

YAESU FTX-1-FIELD New !!!
1'225.-
YAESU FTX-1-OPTIMA New !!!
1'675.-
  
YAESU FTM-150E-ASP335.-
YAESU FT-3185E-ASP219.-
YAESU FT-3165E-ASP189.-
YAESU FT-710 FIELD  (5 Jahre Garantie) CASHBACK + Sonderangebot !!!
925.-
YAESU FT-710 AESS (5 Jahre Garantie) CASHBACK + Sonderangebot !!!999.-
YAESU FTDX10 (5 Jahre Garantie)
1'439.-
YAESU FTDX101MP  (5 Jahre Garantie)
4'458.-
YAESU FTDX101D  (5 Jahre Garantie)
3'180.-
335.-
YAESU FT-991A (5 Jahre Garantie)
1'339.-
YAESU FT-891 (5 Jahre Garantie)
695.-
YAESU FTM-200E (5 Jahre Garantie)
349.-
YAESU FT-300DE (5 Jahre Garantie)
399.-
YAESU FTM-500DE (5 Jahre Garantie)
539.-
YAESU FTM-6000E (5 Jahre Garantie)265.-
YAESU FT-5DE (5 Jahre Garantie) CASHBACK !!!
409.-
YAESU FT-70DE (5 Jahre Garantie)
185.-
125.-
YAESU DR-2XE CASHBACK !!!
1'345.-
645.-
YAESU M-70
119.-
YAESU M-90D
165.-
105.-
YAESU SP-30
109.-
  

UNSER YAESU ANGEBOT - neue Preise 2024 !!!

YAESU FT-4XE (5 Jahre Garantie)
 69.-
YAESU FT-65E (5 Jahre Garantie)
 
89.-
YAESU FT-3100E (5 Jahre Garantie)
 
149.-
YAESU FT-2980E (5 Jahre Garantie) 179.-
 215.-
 269.-
 279.-
 375.-
 445.-

NEW!!!

FTX-1-FIELD / FTX-1-OPTIMA

HF/50/144/430MHz All Mode Field Transceiver

The new FTX-1F is a portable transceiver utilizing SDR technology and provides 6W of power output with the 5670mAh Lithium-ion battery pack (Which enables 9-hours stand-alone operating time on the HF bands, SSB mode, and 8- hours operating time on the V/UHF bands, FM mode based on a 6-6-48 duty cycle). Up to 10W of power output is available when using an external DC power supply.

 

  • Operation in SSB, CW, AM, FM and C4FM digital modes

  • SDR Technology and 3DSS (3-Dimensional Spectrum Stream) on a 4.3-inch high-resolution full-color touch display panel

  • Two independent receiver circuits provide true simultaneous dual-band operation, whether in the same band or in different bands. For example: SSB communication on HF bands simultaneously with C4FM digital communication on V UHF bands (*HF+V, HF+U, V+V, U+U, V+U, U+V)

  • Two Loud speakers ensure clear and powerful audio output

  • An optional Automatic Antenna Tuner can be attached to the rear of the transceiver with the 5670mAh high-capacity Li-ion battery pack. The optional Cooling-fan, which is necessary for comfortable FT8 operation, can also be combined with the antenna tuner. (All-in-one rear panel design)

  • RF front-end and Low Noise Reference Oscillator, enable Phenomenal Multi-signal Receiving characteristics

  • Effective QRM rejection afforded via High-speed 32-bit IF DSP (YAESU’s renowned interference reduction systems: SHIFT / WIDTH / NOTCH / CONTROUR / APF / DNR / NB)

  • Compatible with WiRES-X operation

  • PMG (Primary Memory Group) function can register and monitor up to 5 frequently used frequencies

  • MAG (Memory Auto Grouping) function enables Memory Channels to be categorized in each band that can be quickly recalled by band groups (HF/VHF/UHF/AIR/OTHERS)

  • USB ports support CAT operation, audio input/output and TX control

 

FTX-1-Series_Leaflet

FTX-1-FIELD 1'225.- CHF

FTX-1-OPTIMA 1'675.- CHF

FTM-510DE-ASP

C4FM Digital/FM 55/50W 144/430MHz Dual Band Mobile Transceiver The New Flagship Mobile with Super-DX and ASP

We are pleased to introduce the new C4FM Digital/ FM 55W (VHF)/ 50W (UHF) Dual-Band Mobile Transceiver FTM- 510DE ASP. The FTM-510DE ASP shares the core feature set as the current FTM-500DE yet equipped with the new Super-DX and ASP (Audio Digital Signal Processor Unit).

  • Super-DX: When the received signal is weak, the sensitivity of the RF amplifier can be increased by activating the Super-DX function in both C4FM digital / FM analog modes.

  • ASP (Audio Digital Signal Processor): When operating in FM analog mode, the ASP can also be activated in addition to the Super-DX. By digitally processing the received FM audio to remove noise, the ASP ensures reliable and comfortable audio quality for weak signals. This helps to expand the communication range. ASP AUTO mode is also selectable. In this mode, the ASP is automatically activated when the transceiver detects weak signals in FM analog mode.

For intuitive and effortless operation, the PMG and MAG functions of the FTM-510DE ASP have been improved.

- PMG (Primary Memory Group): Up to 5 VFO or Memory Channel frequencies can be assigned to the PMG (Primary Memory Group) and monitored. The reception status of the PMG channels is displayed with an orange/ gray-colored bar graph in the PMG screen. When a signal disappears, the bar graph color changes from orange to gray in real time. With the FTM-510DE ASP, the gray bar graphs (historical received signals) automatically fade out 2 seconds after a signal is lost. With the FTM-500DE, the gray bar graphs remain until they are manually reset by pressing the DIAL knob.

Other practical differences of the PMG function between the FTM-510DE ASP and the FTM-500DE are:

(Updated PMG in the FTM-510DE ASP)

AUTO Mode

The PMG channels are scanned and up to two channels with signals are simultaneously received and heard. Transmission is automatically performed on the received channel.

MANUAL Mode

The PMG channel manually selected to transmit is always scanned and received. Other PMG channels are also scanned and a channel with signal can be received and heard at the same time. The transmit channel is selectable by rotating the DIAL knob or touching the bar graph of the desirable channel in the PMG screen.

(Current PMG in the FTM-500DE)

AUTO Mode

The PMG channel manually selected to transmit is always scanned and received. Other PMG channels are also scanned and a channel with a signal can be received and heard at the same time. The transmit channel is selectable by rotating the DIAL knob in the PMG screen.

MANUAL Mode

The PMG channel manually selected to transmit is always scanned and received. Other PMG channels are also scanned and shown in bar graph on display, but audio is not heard. The transmit channel is selectable by rotating the DIAL knob in the PMG screen.

- MAG (Memory Auto Grouping): In addition to Memory channels which can be recalled by each band, the FTM-510DE ASP has the new “My Group(M-GRP)” feature which permits selection of any memory channel regardless of band.

For the current FTM-500DE users, the updated PMG function and “My Group” in MAG feature will be available by updating the firmware if it is preferable. The applicable firmware will be released by the end of February 2025.

New SignaLink USB for Anytone, CRT, President & Ranger 10m / 12m radios

New SignaLink USB for Anytone, CRT, President & Ranger 10m / 12m radios

Get on 10m digital for less!  The SignaLink USB p/n SLUSB6R supports a wide variety of inexpensive 10m/12m radios from Anytone, CRT, President and Ranger.  Support for the older Radio Shack HTX-10 and a variety of Kenwood 2m radios is also provided.


The SignaLink USB p/n SLUSB6R is compatible with virtually any radio that uses a 6-pin round style microphone connector (also known as GX16, GX16-6 or Foster). This item includes radio cable p/n SLCAB6R, as well as a 3ft stereo audio  cable for those radios that don't have RX Audio (speaker audio) on the  Mic jack.

Our latest Rev 400 board design provides support for radios that require switching of both a TX Control and a RX Control line (earlier SignaLink USB boards do NOT support this), as well as radios that use a standard, single PTT line.   This includes but is not limited to the Anytone series of 10m radios, the CRT series of 10m/11m radios, the President series of 10m/12m radios, the Ranger series of 6m/10m radios, and the Radio Shack HTX-10.

Compatible Radios

Anytone: AT-500M, AT-6666, AT-6666PRO, Various 10m models

CRT: SS9900, MegaPro

Kenwood: TR-7800, TR-7850, TR-7950, TR-9000, TR-9130

President: President Lincoln II, President Lincoln II+, President Richard, President Ronald, President Washington

Radioddity: QT-80

Ranger: RCI-2950, RCI-2950DX, RCI-2950DX-CD, RCI-2970, RCI-2970N2, RCI-2970N3, RCI-2970N4, RCI-5054DX

Radio Shack: HTX-10

FTM-150E-ASP

55/50W 144/430MHz FM Dual Band Mobile Transceiver
with the New Evolving Super-DX and Audio Digital Signal Processor

The FTM-150EASP provides true dual band operation with two different receivers on different bands or within the same band (V+V, U+U, V+U, U+V). Full Dot-Matrix display is graphically visible and provides a clear and crispview of the radio operating status. Front panel is detachable, and by attaching the optional swing-head - SJMK-500, flexible angle adjustment is possible to accommodate easy mobile operation.

The power output is 55W on VHF and 50W on UHF (55W / 50W, 25W, 5W is selectable). Heavy Duty Heat Sink with FACC (Funnel Air Convection Conductor) ensures stable and reliable transmit power.

A front speaker is furnished inside the control-head. The front speaker, in combination with the main body speaker, provides a total of 6W high quality audio (3W: Front Speaker / 3W: Main Body Speaker). Volume level of the main body speaker is adjustable (0 – 100%) relative to the front panel speaker for users’ preference.

The Super-DX function increases the receiver sensitivity and improves weak signal reception. The new ASP: Audio Digital Signal Processing Unit is also activated when the Super-DX key is pressed. The Super-DX with the ASP ensures reliable audio quality for weak signals and expands the communication range.

Some remarkable and convenient features of the FTM-150E-ASP are:

  • PMG (Primary Memory Group). Up to 5 VFO or Memory Channel frequencies may be assigned to the PMG (Primary Memory Group). The reception status of the PMG channels is displayed in real time with a bar graph in the PMG screen. The AUTO or MANUAL mode is switchable by pressing and holding the Main VFO knob during PMG operation. The AUTO mode simultaneously shows up to two channels when signals are received. Transmit is automatically moved to the received channel. In the MANUAL mode, transmit and receive stay on the manually selected channel. The signal received on the other channel is shown on the screen and the audio can be heard.
  • CFL (Customized Function List). Up to 9 frequently used functions from the 62 Menus can be registered and then easily selected.
  • MAG (Memory Auto Grouping). Memory channels can be automatically grouped and recalled for each band. The new “My Group” feature in MAG permits selection of any memory channel regardless of band.
  • VFO Band Skip function. Bands that are not normally used can be set to hide.
  • High-resolution Band Scope. Up to 47 channels can be displayed with the Scope operation. By rotating the left DIAL knob, the frequency range can be centered and the signal at the center marker is received. By rotating the right DIAL knob, the marker can be moved across the display and the signal at the marker is received.

By installing the optional Bluetooth® unit – BU-5, hands-free operation is available with the optional Bluetooth® headset SSM-BT20 or a commercially available Bluetooth® product.

Some other features of the FTM-150E ASP are: Large-capacity of 1103 memory channels, Memory Data VFO Transfer, Split Memory, Microphone connections to either the control-head or the front of the main body, Sub Band mute function, Keypad entry of operating frequencies from the supplied DTMF microphone, MicroSD memory card slot, Automatic Repeater Shift function, Time-Out Timer (TOT), and Automatic Power-Off (APO).

Brochure

FT-3185E-ASP

85W 144MHz FM Mobile Transceiver
With the New Evolving Super-DX and Audio Digital Signal Processor

The FT-3185E ASP delivers dependable, high-performing 85W of transmit power. The Massive Heatsink with no cooling fan ensures reliable solid 85W RF power (selectable 85W / 50W / 20W / 5W).

The Super-DX function increases the receiver sensitivity and improves weak signal reception. The new ASP: Audio Digital Signal Processing Unit is also activated when the Super-DX key is pressed. The Super-DX with the ASP ensures reliable audio quality for weak signals and expands the communication range.

The remarkable and convenient features of the new FT-3185E-ASP are:

  • PMG (Primary Memory Group). Up to 5 VFO or Memory Channel frequencies may be assigned to the PMG (Primary Memory Group). The reception status of the PMG channels is displayed in real time with a bar graph in the PMG screen. The AUTO or MANUAL mode is switchable by pressing and holding the Main VFO knob during PMG operation. The AUTO mode shows the received channel. Transmit is automatically moved to the received channel. In the MANUAL mode, transmit and receive stay on the manually selected channel. When there is no signal on the manually selected channel, the bar graph will display the activity of the other PMG channels.
  • CFL (Customized Function List). Up to 9 frequently used functions from the 44 Menus can be registered and be easily called.

Some other convenient features of the FT-3185E ASP are: Large-capacity of 221 Memory channels with Alpha-numeric 6-character labels, Keypad entry of operating frequencies from the supplied DTMF microphone, Versatile Scan features such as Preferential Memory Scan, VFO Scan, Priority Channel Scan (Dual Watch), CTCSS / DCS Encode/Decode, Separate Transmit offset Frequency Memories, RF squelch, EPCS (Enhanced Paging & Code Squelch) operation, Display Illumination Adjustment, Automatic Power-Off (APO), Time-Out Timer (TOT), Busy Channel Lock-out (BCLO), and 10 NOAA Weather Broadcast Channels with Weather Alert (USA version only).

Brochure

FT-3165E-ASP

65W 144MHz FM Mobile Transceiver
With the New Evolving Super-DX and Audio Digital Signal Processor

The FT-3165E ASP is a compact 2-meter mobile transceiver with solid basic features configuration and mechanical toughness. The power output is 65W (selectable 65W / 30W / 5W) and its efficient cooling system with the FACC: Funnel Air-Convection Conductor (Wind Tunnel) ensures stable and reliable power.

New front speaker provides 5W of loud audio and has been tuned for improved sound quality. With the optional MLS- 100 external speaker, the FT-3165EASP transceiver supports uninterrupted communication even in a noisy environment.

The Super-DX function increases the receiver sensitivity and improves weak signal reception. The new ASP: Audio Digital Signal Processing Unit is also activated when the Super-DX key is pressed. The Super-DX with the ASP ensures comfortable audio quality of weak signals and expands the communication range.

Some other convenient features of the FT-3165EASP are: Large-capacity of 220 Memory channels with Alpha-numeric 8-character labels, Keypad entry of operating frequencies from the supplied DTMF microphone, Versatile Scan features such as Preferential Memory Scan, VFO Scan, Priority Channel Scan (Dual Watch), CTCSS / DCS Encode/Decode, Separate Transmit offset Frequency Memories, RF squelch, EPCS (Enhanced Paging & Code Squelch) operation, Display Illumination Adjustment, Automatic Power-Off (APO), Time-Out Timer (TOT), Busy Channel Lock-out (BCLO), and 10 NOAA Weather Broadcast Channels with Weather Alert.

Brochure