News Archive

NEW ExpertSDR3 1.0.0 Beta

ExpertSDR3 1.0.0 Beta is designed for MB1, SunSDR2 DX/PRO/QRPtransceivers and ColibriDDC, ColibriNANO receivers.

Server software ALPHA build 20221028 is designed for MB1, SunSDR2 DX/PRO/QRP transceivers and ColibriDDC, ColibriNANO receivers.


Please note that this is a beta version, the ExpertSDR3 is still under development. The ExpertSDR3 software is provided on an “as is” basis.


Expert Electronics will not be liable for any loss, suffered by the user as a result of their use of the ExpertSDR3software. You use the software at your own risk and will be solely responsible for any damage to a transceiver/receiver or connected external devices that results from such activities.

Should you encounter any bugs, glitches, or other problems, please fill in thebug report.
Your help in this regard is greatly appreciated!

Release Notes

NEW YAESU FT-710 AESS HF/50MHz SDR Transceiver !!!

-  YAESU Unmatched SDR technology emphasizes the Receiving Performance

-  Band Pass Filters dedicated for the amateur bands to eliminate out-of-band unwanted signals

-  RF Front-End design with the 250MHz HRDDS (High Resolution Direct Digital Synthesizer) enables phenomenal Multi-Signal Receiving Characteristics

-  QRM rejection by the dual core 32-bit high speed floating decimal point DSP for SHIFT/ WIDTH/ NOTCH/CONTOUR/APF (Audio Peak Filter)/ DNR (Digital Noise Reduction)/ NB (Noise Blanker) and 3-Stage Parametric Equalizer

-  High Resolution 4.3-inch TFT Color Touch Panel Display

-  3DSS (3-Dimensional Spectrum Stream)

-  VMI LED (VFO Mode Indicator) placed around the VFO dial shows the current operating mode (VFO-A, VFOB, Memory Mode and Clarifier/Split Operation)

-  “PRESET” Mode Function most suitable for FT8 Operation

-  AESS: Acoustic Enhanced Speaker System with SP-40 creates the high-fidelity audio output

-  External Display Connection Terminal (DVI-D)

-  Built-in High Speed Automatic Antenna Tuner with 100 channel memory

-  Support the FC-40 Auto Antenna Tuner

-  SD Memory Card can be used to save the communication record, transceiver setting, the memory contents, screen capture images, and to update the firmware

-  Two (2) USB Ports (Type-A and Type-B)

-  Other essential features such as CW ZIN and SPOT, IPO (Intercept Point Optimization), and Remote Operation with Network Remote Control System to name a few

 

Specifications

TX Frequency Range:

1.8MHz band – 50MHz band (Amateur bands only)

 

70MHz – 70.5MHz (UK Amateur bands only

RX Frequency Range:

30KHz – 75MHz (Operating)

 

1.8MHz – 29.699999MHz (Specified performance, Amateur bands only)

 

50MHz – 53.999999MHz (Specified performance, Amateur bands only)

 

70MHz – 70.499999MHz (Specified performance, UK Amateur bands only)

Emission Modes

A1A(CW), A3E(AM), J3E(LSB/USB), F3E(FM)

Supply Voltage

DC13.8V ±15%

Power Output:

5 - 100W (5 – 25W AM Carrier)

Dimensions (W x H x D):

9.4” x 3.1” x 9.7” (239 x 80 x 247mm)

Weight (Approx.):

9.92lbs (4.5kg)

NEW YAESU FTM-200DE !!!

Analog/digital C4FM/FM 144MHz/430MHz Dual Band 50W transceiver

  • 50W Stable High-Power with Heavy Duty Heat Sink with FACC (Funnel Air-Convection Conductor) *Selectable 50W/25W/5W

  • 2-inch High-Resolution QVGA Full-Color TFT Display and Demountable Front Panel Controller

  • 3W of Powerful, Clear and Crisp Audio Speaker

  • Advanced C4FM Digital Mode with AMS (Automatic Mode Select), DG-ID feature and Smart Navigation

  • PMG-SR Monitor (Primary Memory Group with a Single Receiver) provides constant monitoring and communication on up to 5 channels with PMG

  • Custom Function List (CFL) Display allows checking and immediately executing priority functions. Up to 8 functions or setting from the set-up menu can be registered

  • MAG (Memory Auto Grouping) Function allows memory channels to be automatically categorized in all, AIR band, VHF/UHF band and other

  • 1104 Memory Channels including 5 "Home" channels, 50 sets of memories for programmable memory scan and 999 "Basic" memories

  • VFO Band Skip Function

  • High speed Band Scope function

  • Memory Channel Data Transfer to the VFO Register

  • Built-in 66ch High precision GPS receiver and External GPS device connectivity

  • Wireless Operation Capability with the Bluetooth® Headset *Requires the installation of an optional Bluetooth Unit BU-4

  • WiRES-X Portable Digital Node / Fixed Node with HRI-200

  • Voice Recording function for receive and transmit audio

  • Micro-SD Card Slot (up to 32GB)

  • Snapshot Feature with the optional microphone MH-85A11U

Catalog

NEW RTsystems Programming kits !!!

YPS-FT5D-USB

YPS-M300-USB

YPS-M6000-USB

YPS-DX10-USB

NEU FLOHMARKT PRODUKTE

YAESU FTM-6000DE 50W 144/430MHz Dual-Band FM Mobile Transceiver

YAESU FTM-6000DE 50W 144/430MHz Dual-Band FM Mobile Transceiver

  • 50W Stable High-Power with Heavy Duty Heat Sink with FACC (Funnel Air-Convection Conductor) *Selectable 50W/25W/5W

  • 3W of Powerful, Clear and Crisp Audio Speaker

  • New User Operating Interface : E2O-III (Easy to Operate-III)

  • PMG (Primary Memory Group) Function allows instantly recall of the frequently used frequencies registered in the PMG

  • MAG (Memory Auto Grouping) Function allows memory channels to be automatically categorized in all memory channels, AIR band,

  • VHF band, UHF band and others and can be quickly recalled by band groups

  • VFO Band Skip Function

  • Memory Data Transfer to the VFO Register

  • Wide-range receive coverage from 108MHz to 999.995MHz

  • Wireless Operation Capability with the Bluetooth® Headset *Requires the installation of an optional Bluetooth Unit BU-4

  • Detachable Front Panel to be mounted at the desirable operating position

  • 1,100 Memory channels with character alphanumeric tags

  • Supplied Multi-Functional DTMF Microphone - SSM-85D

YAESU Air Band Transceivers FTA-850L NEW !!!

YAESU FT-5DE 5W C4FM/FM 144/430MHz Dual-Band Digital Mobile Transceiver NEW !!!

YAESU FT-5DE 5W C4FM/FM 144/430MHz Dual-Band Digital Mobile Transceiver

  • Compact Design and Reliable 5W RF Power Output (Selectable 5W / 2.5W / 1W / 0.3W)

  • High Visibility Full-Color TFT Touch panel Display (*The color of the operating frequency may be selected from White, Blue or Red.)

  • Dual band Simultaneous Receive (V+V / U+U / V+U / U+V) & C4FM/C4FM Standby

  • Advanced C4FM Digital Mode with AMS (Automatic Mode Select), DG-ID feature and Smart Navigation

  • 1W (1000mW) of loud audio power with C4FM clear and crisp audio quality

  • Rugged Construction: Robust Rubber Protection / IPX7 Rating Water Protection

  • TOUCH & GO Operation with Activity Monitor

  • PMG (Primary Memory Group Activity Monitor)

  • CAM (CH Activity Monitor)

  • VFO Band Skip Function

  • Memory Auto Grouping (MAG) Function

  • High Speed Band Scope Function enables monitoring up to 79ch centered on the current VFO frequency (Selectable 79 / 39 / 19ch)

  • Full-Flat back body provides excellent grasp / Quick Release Holster(SHB-26BK) Included

  • Built-in 66ch High-Sensitivity GPS Receiver

  • Built-in Bluetooth® unit and the VOX function support wierless and easy Hands-free operation

  • WIRES-X Portable Digital Node compatible

  • Dual Simultaneos AM/FM Broadcast Reception and 2-channel Monitoring

  • 1200/9600bps APRS® Data Communication

  • Recording Function

  • Micro SD Card Slot (up to 32GB)

Brochure

NEW !!! YAESU FTDX-10 HF/50MHz 100W SDR Transceiver

YAESU FTDX-10 HF/50MHz 100W SDR Transceiver

  • HF/50MHz band 100W Transceiver
  • Hybrid SDR configuration utilizing a Narrow Bandwidth SDR, and a Direct Sampling SDR
  • Narrow Band SDR enables Phenomenal Multi-signal Receiving characteristics (2kHz RMDR 116dB+, 2kHz BDR 141dB+, 2kHz 3rd IMDR 109dB+)
  • Down conversion, 9MHz IF Roofing Filters produce Excellent Shape Factor
  • 250 MHz HRDDS (High Resolution Direct Digital Synthesizer) Ultra Low-Noise Local-Oscillator System
  • 15 Separate Powerful Band Pass Filters (BPF)
  • Effective QRM Rejection with IF DSP (IF SHIFT/WIDTH, IF NOTCH / DNF, CONTOUR, DNR, APF)
  • High-quality and Super-Stable Final Amplifier utilizing the new push-pull MOSFET RD70HUP2
  • 5-inch Full Color Touch Panel and 3DSS (3-Dimensional Spectrum Stream) Display
  • MPVD (Multi-Purpose VFO Outer Dial) enables Outstanding Operating Performance
  • Quick Memory Bank (QMB)
  • Supports CW operation with multiple functions such as: CW zero-in, CW Auto zero-in, CW Reverse, CW decode, CW keying Signal form Shaping by FPGA and others
  • RTTY (FSK)/ PSK Encode/Decode Function
  • Other practical features such as Optional RF Gain Selection by IPO. Automatic Gain Control, Quick Split Function
  • SD Card Slot
  • Remote Operation via Internet with optional LAN-Unit (SCU-LAN10)

Brochure

Link

TBD.- CHF

Verfügbar ab Dezember 2020

Check out our new SIGNALINK cables !!!